We offer revolution of industrial engineering
Get an Estimate

Technical Specification

  • Home
  • Technical Specification
Click Here To View Technical Data
  • Stainless Steel Pipe/Plates

    Chemical Composition


    CHEMICAL COMPOSITION ( IN PERCENTAGE )
    Grade C (Max) Mn (Max) P (Max) S (Max) Si (Max) Cr Ni Mo Nitrogen (Max) Cu/ Others
    301 0.15 2.00 0.045 0.030 1.00 16.00 - 18.00 6.00 - 8.00 - 0.10 -
    304 0.08 2.00 0.045 0.030 0.75 18.00 - 20.00 8.00- 10.50 - 0.10 -
    304L 0.030 2.00 0.045 0.030 0.75 18.00 - 20.00 8.00- 12.00 - 0.10 -
    310S 0.08 2.00 0.045 0.030 1.50 24.00- 26.00 19.00 - 22.00 - - -
    316 0.08 2.00 0.045 0.030 0.75 16.00 - 18.00 10.00 - 14.00 2.00 - 3.00 0.10 -
    316L 0.030 2.00 0.045 0.030 0.75 16.00 - 18.00 10.00 - 14.00 2.00 - 3.00 0.10 -
    317 0.08 2.00 0.045 0.030 0.75 18.00 - 20.00 11.00 - 14.00 3.00 - 4.00 0.10 -
    317L 0.030 2.00 0.045 0.030 0.75 18.00 - 20.00 11.00 - 15.00 3.00 - 4.00 0.10 -
    321 0.08 2.00 0.045 0.030 0.75 17.00 - 19.00 9.00 - 12.00 - 0.10 Ti5 ( C + N ) Min or 0.70 max
    347 0.08 2.00 0.045 0.030 0.75 17.00 - 19.00 9.00 - 13.00 - - Cb= 10x ( C Min ) or 1.00 Max
    409 0.08 1.00 0.040 0.010 1.00 10.50 - 11.75 0.50 - - Ti= 6x (C+ N ) Min or 0.70 Max
    409M 0.03 0.81.2 0.030 0.030 0.40.75 11.00- 12.00 1.5 max. - - Ti= 6x (C) Min or 0.70 Max
    410S 0.08 1.00 0.040 0.030 1.00 11.50- 13.50 0.60 - - -
    410 0.15 1.00 0.040 0.030 1.00 11.50- 13.50 0.75 - - -
    420 0.35 0.50 0.035 0.015 0.50 12.00 - 13.00 0.20.3 - - -
    430 0.12 1.00 0.040 0.030 1.00 16.00 - 18.00 0.75 - - -
    JSL AUS 0.08 7.08.0 0.070 0.030 0.75 15.50 - 16.50 4.25 - 4.75 - - 0.9 - 1.10
    JS- 203 0.08 9.2510.25 0.070 0.030 0.75 14.25 - 15.25 2.25 - 2.75 - - 1.60- 2.0
    301M 0.10 4.55.5 0.060 0.030 0.75 14.50 - 15.50 6.0 - 7.0 - - 1.70- 1.90
    * Thickness of 1.27mm & below will have elongation of 20% min.
     

    Mechanical Properties


    MECHANICAL PROPERTIES
    Grade Tensile
    Strength Mpa, (Min)    		 Yield
    Strength
    Mpa, (Min)    		 %Age
    Elongation
    in 50mm
    gauge length min    		 Hardness (Max)
    BHN Rb
    301 515 205 40 217 95
    304 515 205 40 201 92
    304L 485 170 40 201 92
    310S 515 205 40 217 95
    316 515 205 40 217 95
    316L 485 170 40 217 95
    317 515 205 35 217 95
    317L 515 205 40 217 95
    321 515 205 40 217 95
    347 515 205 40 201 92
    409 380 170 20 179 88
    409M 430 275 20 187 90
    410S 415 205 22 183 89
    410 450 205 20 217 89
    420 700( max ) - 15 217 95
    430 450 205 22 183 89
    JSL AUS 515 205 40 217 95
    JS- 203 515 205 40 217 95
    301M 515 205 40 217 95
  • Alloy Steel Pipe/Plates
    Pipes Tubes
    ASTM A 335 Grade P - 11 ASTM 213 Grade T - 11
    ASTM A 335 Grade P - 12 ASTM 213 Grade T - 12
    ASTM A 335 Grade P - 22 ASTM 213 Grade T - 22
    ASTM A 335 Grade P - 9 ASTM 213 Grade T - 5
    ASTM A 335 Grade P - 9 A ASTM 213 Grade T - 9
    ASTM A 335 Grade P - 5 ASTM 213 Grade T - 9 A
    BS 3604 Grade 620 - 440 ASTM 213 Grade T - 2
    BS 3604 Grade 621 ASTM 213 Grade T - 1
    BS 3604 Grade 622 ASTM 213 Grade T - 1 B
    BS 3604 Grade 625 DIN 17175 15 Mo 3
    BS 3604 Grade 629 - 470 DIN 17175 13 Cr Mo 44
    BS 3604 Grade 629 - 590 DIN 17175 10 Cr Mo 910
    BS 3604 Grade 660 DIN 17175 14 Mo V 63
    BS 3604 Grade 762 DIN 17175 X 20 Cr Mo V 121
      BS 3059 Grade 243
    BS 3059 Grade 620 - 460
    BS 3059 Grade 622 - 490
    BS 3059 Grade 629 - 470
    BS 3059 Grade 629 - 590
    BS 3059 Grade 762

  • Carbon Steel Pipe/Plates
    CHEMICAL ANALYSIS Mechnical Properties SPECIFIC REQUIREMENT
    Tensile Strength Yield Strength Elongation
    Specification WT C% Mn% P% MAX S% MAX Si% Cr% Mo% Mpa Mpa 50mm MIN Longitudinal  
    ASTM A 53/A
    ASTM A 53/B
    ASTM A 106/A
    ASTM A 106/B
    ASTM A 106/C    		 AW
    AW
    AW
    AW
    AW     		0.25MAX
    0.30MAX
    0.25MAX
    0.30MAX
    0.35MAX     		0.95MAX
    1.20MAX
    0.27-0.93
    0.29-1.06
    0.29-1.06
    		 0.050
    0.050
    0.025
    0.025
    0.025
    		 0.060
    0.060
    0.025
    0.025
    0.025     		-
    -
    0.10MIN
    0.10MIN
    0.10MIN
    		 -
    -
    0.40MAX
    0.40MAX
    0.40MAX     		-
    -
    0.15MAX
    0.15MAX
    0.15MAX
    		 331MIN
    413MIN
    330MIN
    415MIN
    485MIN
    		 207 MIN
    240MIN
    205MIN
    240MIN
    275MIN
    		 36
    29.5
    35/28
    30/22
    30/22
    		 Cr     Mo   Cu    Ni    Va
    0.40 0.15 0.40 0.40 0.08
    five elements not to exceed 1%
    ASTM A 179
    ASTM A 214
    ASTM A 192
    ASTM A 209/T1
    ASTM A 209/T1a
    ASTM A 209/T1B
    ASTM A 210/A-1
    ASTM A 210/C    		 MW
    MW
    MW
    MW
    MW
    MW
    MW
    MW     		0.06-018
    0.18MAX
    0.06-0.18
    0.10-0.20
    0.15-0.25
    0.14MAX
    0.27MAX
    0.35MAX     		0.27-0.63
    0.27-0.63
    0.27-0.63
    0.30-0.80
    0.30-0.80
    0.30-0.80
    0.93MAX
    0.29-1.06
    		 0.048
    0.050
    0.048
    0.045
    0.045
    0.045
    0.048
    0.048
    		 0.048
    0.050
    0.048
    0.045
    0.045
    0.045
    0.058
    0.058    		 -
    -
    0.25MAX
    0.10-0.50
    0.10-0.50
    0.10-0.50
    0.10MIN
    0.10MIN
    		 -
    -
    -
    -
    -
    -
    -
    -     		-
    -
    -
    0.44-0.65
    0.44-0.65
    0.44-0.65
    -
    -     		325MIN
    385MIN
    325MIN
    380MIN
    365MIN
    415MIN
    415MIN
    485MIN
    		 180MIN
    180MIN
    180MIN
    205MIN
    195MIN
    220MIN
    255MIN
    275MIN
    		 35.0
    35.0
    35.0
    30/22
    30/22
    30/22
    30/22
    30/22
    		 Hardness 72 HRB MAX
    Hardness 72 HRB MAX
    Hardness 77 HRB MAX
    Hardness 80 HRB MAX
    Hardness 81 HRB MAX
    Hardness 77 HRB MAX
    Hardness 79 HRB MAX
    Hardness 89 HRB MAX
    ASTM A 213/T2
    ASTM A 213/T5
    ASTM A 213/T11
    ASTM A 213/T12
    ASTM A 213/T22
    		MW
    MW
    MW
    MW
    MW
    		 0.10/0.20
    0.15MAX
    0.15MAX
    0.15MAX
    0.15MAX
    		 0.30-0.61
    0.30-0.60
    0.30-0.60
    0.30-0.61
    0.30-0.60
    		 0.045
    0.030
    0.030
    0.045
    0.030
    		 0.045
    0.030
    0.030
    0.045
    0.030
    		 0.10-0.30
    0.50MAX
    0.50-1.00
    0.50MAX
    0.50MAX
    		 0.50-0.81
    4.00-6.00
    1.00-1.50
    0.80-1.25
    1.90-2.60
    		 0.44-0.65
    0.44-0.65
    0.44-0.65
    0.44-0.65
    0.87-1.13    		 415MIN
    415MIN
    415MIN
    415MIN
    415MIN    		 205MIN
    205MIN
    205MIN
    220MIN
    205MIN
    		 30/22
    30/22
    30/22
    30/22
    30/22
    		 Hardness 85 HRB MAX
    Hardness 85 HRB MAX
    Hardness 85 HRB MAX
    Hardness 85 HRB MAX
    Hardness 85 HRB MAX
    ASTM A 333/1
    ASTM A 333/6
    ASTM A 334/1
    ASTM A 334/6
    		 AW
    AW
    AW
    AW     		0.30MAX
    0.30MAX
    0.30MAX
    0.30MAX
    		 0.40-1.06
    0.29-1.06
    0.40-1.06
    0.29-1.06
    		 0.025
    0.025
    0.025
    0.025
    		 0.025
    0.025
    0.025
    0.025    		 -
    0.10MIN
    -
    0.10MIN
    		 -
    -
    -
    -     		-
    -
    -
    -     		380MIN
    415MIN
    380MIN
    415MIN
    		 205MIN
    240MIN
    205MIN
    240MIN     		25/20
    30/22
    35/28
    30/22     		Impact AS-50F
    FOR 40X10J/18/14
    -50F 40X10J/18/14
    90 HRB MAX
    ASTM A 335/P1
    ASTM A 335/P2
    ASTM A 335/P5
    ASTM A 335/P9
    ASTM A 335/P11
    ASTM A 335/P12
    ASTM A 335/P22
    		AW
    AW
    AW
    AW
    AW
    AW
    AW     		0.10-0.20
    0.10-0.20
    0.15MAX
    0.15MAX
    0.15MAX
    0.15MAX
    0.15MAX
    		 0.30-0.80
    0.30-0.61
    0.30-0.60
    0.30-0.60
    0.30-0.60
    0.30-0.61
    0.30-0.60
    		 0.025
    0.025
    0.025
    0.025
    0.025
    0.025
    0.025
    		 0.025
    0.025
    0.025
    0.025
    0.025
    0.025
    0.025    		 0.10-0.50
    0.10-0.30
    0.50MAX
    0.25-1.00
    0.50-1.00
    0.50MAX
    0.50MAX
    		 -
    0.50-0.81
    4.00-6.00
    8.00-10.00 1.00-1.50
    0.80-1.25
    1.90-2.60
    		 0.44-0.65
    0.44-0.65
    0.45-0.65
    0.09-1.10
    0.44-0.65
    0.44-0.65
    0.87-1.13
    		 380MIN
    380MIN
    415MIN
    415MIN
    415MIN
    415MIN
    415MIN    		 205MIN
    205MIN
    205MIN
    172MIN
    205MIN
    205MIN
    205MIN     		30/22
    30/22
    30/22
    30/22
    30/22
    50/22
    30/22
    		 
    BS/3059/1/33
    BS/3059/2/33
    BS/3059/2/45
    BS/3059/2/620     		  0.15MAX
    0.15MAX
    0.12-0.18
    0.10-0.15
    		 0.30-0.70
    0.40-0.70
    0.90-1.20
    0.40-0.70
    		 0.050
    0.050
    0.035
    0.040
    		 0.050
    0.050
    0.035
    0.040    		 -
    0.10-0.35
    0.10-0.35
    0.10-0.35
    		 -
    -
    -
    0.70-1.10     		-
    -
    -
    0.45-0.65

    		324-441
    324-441
    441-560
    441-618
    		 186MIN
    186MIN
    245MIN
    235MIN
    		 25
    21
    22
    22     		 
    DIN/17175/ST35.8
    DIN/17175/ST45.8
    DIN/17175/15MO3
    DIN/17175/13CrMO44
    DIN/17175/10CrM910
    		  0.17MAX
    0.22MAX
    0.12-0.20
    0.10-0.18
    0.15MAX
    		 0.40MIN
    0.45MIN
    0.50-0.80
    0.40-0.70
    0.40-0.60
    		 0.040
    0.040
    0.040
    0.040
    0.040
    		 0.040
    0.040
    0.040
    0.040
    0.040    		 0.35MAX
    0.10-0.35
    0.10-0.35
    0.10-0.35
    0.15-0.50
    		 -
    -
    -
    0.70-1.60
    2.0-2.5     		-
    -
    0.25-0.35
    0.40-0.50
    0.9-1.10     		340-441
    441-540
    441-540
    441-570
    441-570
    		 235MIN
    255MIN
    284MIN
    294MIN
    294MIN
    		 25
    25
    21
    22
    22     		 
    ASTM A 199/T5
    ASTM A 199/T11
    ASTM A 199/T22
    ASTM A 199/T4
    ASTM A 199/T7
    ASTM A 200/T5
    ASTM A 200/T11
    ASTM A 200/T22
    ASTM A 200/T4
    ASTM A 200/T7
    ASTM A 199/T9
    		 MW
    MW
    MW
    MW
    MW
    MW
    MW
    MW
    MW
    MW
    MW
    		 0.50-0.15
    0.50-0.15
    0.50-0.15
    0.15MAX
    0.15MAX
    0.15MAX
    0.50-0.15
    0.50-0.15
    0.50-0.15
    0.15MAX
    0.15MAX
    		 0.30-0.60
    0.30-0.60
    0.30-0.60
    0.30-0.60
    0.30-0.60
    0.30-0.60
    0.30-0.60
    0.30-0.60
    0.30-0.60
    0.30-0.60
    0.30-0.60    		 0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    		 0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    		 0.50MAX
    0.50-1.00
    0.50MAX
    0.50-1.00
    0.50-1.00
    0.50-1.00
    0.50-1.00
    0.50MAX
    0.50-1.00
    0.50-1.00
    0.25-1.00
    		 4.00-6.00
    1.00-1.50
    1.90-2.60
    2.15-2.85
    6.00-8.00
    4.00-6.00
    1.00-1.50
    1.90-2.60
    2.15-2.85
    6.00-8.00
    8.00-10.0
    		 0.45-0.65
    0.44-0.65
    0.87-1.13
    0.44-0.65
    0.45-0.65
    0.45-0.65
    0.44-0.65
    0.87-1.13
    0.44-0.65
    0.45-0.65
    0.90-1.10     		415MIN
    415MIN
    415MIN
    415MIN
    415MIN
    415MIN
    415MIN
    415MIN
    415MIN
    415MIN
    415MIN     		170MIN
    170MIN
    170MIN
    170MIN
    170MIN
    170MIN 170MIN
    170MIN
    170MIN
    170MIN
    170MIN
    		 30/22
    30/22
    30/22
    30/22
    30/22 30/22
    30/22
    30/22
    30/22
    30/22
    30/22
    		Hardness 85 HRB MAX
    Hardness 85 HRB MAX
    Hardness 85 HRB MAX
    Hardness 85 HRB MAX
    Hardness 85 HRB MAX
    Hardness 85 HRB MAX
    Hardness 85 HRB MAX
    Hardness 85 HRB MAX
    Hardness 85 HRB MAX
    Hardness 85 HRB MAX
    Hardness 85 HRB MAX

  • Non Ferrous Metal
    U.S.A. / GROSSBRITAINNIE  U.S.A. / GRANDE-BRETAGNE   U.S.A. / GREAT BRITAIN
    Analyses     Analyses   Composition       
    Handelsbezeichung
    Designation Comercial
    Comercial designation    		 C% Co% Cr% Mo% Ni% V% W% Ai% Cu% Nb/Cb Ta% Ti% Fe% Sonstige Autres-Other%
    Monel 400 0.12 - - - 65.0 - - - 32.0 - - 1.5 Mn 1.0
    Monel 401 0.10 - - - 43.0 - - - 53.0 - - 0.75 Si 0.25; Mn 2.25
    Monel 404 0.15 -     52.0-57.0 - - 0.05 rest/bal - - 0.50 Mn 0.10; Si 0.10;S o.024
    Monel 502 0.10 - - - 63.0-17.0 - - 2.5-3.5 rest/bal - 0.50 2.0 Mn 1.5;Si 0.5; S 0.010
    Monel K 500 0.13 - - - 64.0 - - 2.8 30.0 - 0.6 1.0 Mn 0.8
    Monel R 405 0.15 - - - 66.0 - - - 31.0 - - 1.2 Mn 1.0; S 0.04
    Hastelloy B 0.10 1.25 0.60 28.0 rest/bal 0.30 - - - - - 5.50 Mn 0.80; Si 0.70
    Hastelloy B2 0.02 1.0 1.0 26.0-30.0 rest/bal - - - - - - 2.0 Mn 1.0: Si 0.10
    Hastelloy C 0.07 1.25 16.0 17.0 rest/bal 0.30 40 - - - - 5.75 Mn 1.0 :Si 0 0.70
    Hastelloy C4 0.015 2.0 14.0-18.0 14.0-17.0 rest/bal - - - - - 0..70 3.0 Mn 1.0 ; Si 0.08
    Hastelloy  C 276 0.02 2.5 14.0-16.5 15.0-17.0 rest/bal 0.35 3.0-4.5 - - - - 4.0-7.0 Mn 1.0;Si 0.05
    Hastelloy F 0.02 1.25 22.0 6.5 rest/bal - 0.50 - - Nb2.10 - 21.0 Mn 1.50;Si 0.50
    Hastelloy G 0.05 2.5 21.0-23.5 5.5-7.5 rest/bal - 1.0 - 1.5-2.5 Nb1.75-2.5 - 18.0-21.0 Mn 1.0-2.0;p0.04;Si 1.0;80.03
    Hastelloy G-2 0.03 - 23.0-26.0 5.0-7.0 47.0-52.0 - - - 0.70-1.20 - 0.70-1.50 rest/bal Mn 1.0;Si 1.0
    Hastelloy N 0.06 0.25 7.0 16.5 rest/bal - 0.20 - 0.10 - - 3.0 Mn 0.40;Si 0.25;B0.01
    Hastelloy S 0.02 2.0 15.5 14.5 rest/bal 0.6 1.0 0.20 - - - 3.0 Mn 0.50;Si 0.40;B0.0009;LA 0.02
    Hastelloy W 0.06 1.25 5.0 24.5 rest/bal - - - - - - 5.5 Mn 0.050 ; Si 0.50
    Hastelloy X 0.10 1.50 22.0 9.0 rest/bal - 0.60 - - - 18.5 - Mn 0.6; Si 0.60
    Incoloy 800 0.04 - 21.0 - 32.0 - - 0.3 - - 0.4 45.0 -
    Incoloy 800 H 0.08 - 21.0 - 32.0 - - 0.3 - - 0.4 45.0 -
    Incoloy 801 0.05 - 20.5 - 32.0 - - - - - 1.1 45.0 -
    Incoloy 802 0.35 - 21.0 - 32.0 - - 0.6 - - 0.7 45.0 -
    Incoloy 804 0.05 - 29.5 - 41.0 - - 0.3 - - 0.6 25.4 -
    Incoloy 805 0.12 - 7.5 0.50 36.0 - - - 0.10 - - rest/bal Mn 0.60;Si 0.50
    Incoloy 810 0.25 - 21.0 - 32.0 - - - 0.50 - - rest/bal Mn 0.90; Si 0.80
    Incoloy 825 0.04 - 21.0 3.0 42.0 - - - 2.0 - 1.0 30.0 -
    Incoloy 825 Cp 0.04 - 21.5 3.0 42.0 - - - 2.2 Nb0.9 - 30.0 -
    Incoloy 840 0.08 - 20.0 - 20.0 - - - - - - rest/bal Mn 1.0;Si 1.0
    Incoloy 901 0.05 - 12.5 6.0 rest/bal - - 0.15 - - 2.70 34.0 Mn 0.24;Si 0.12;B0.015
    Incoloy 901 Mod 0.05 - 12.5 5.80 rest/bal - - - - - 2.9 34.0 Mn 0.09;Si 0.08;B0.015
    Incoloy 903 0.02 15.0 - - 38.0 - - 0.7 - Nb 3.0 1.4 41.0 -
    Incoloy 904 0.02 14.0 - - 33.0 - - - - - 1.7 50.0 -
    Incoloy DS 0.06 - 18.0 - 37.0 - - - - - - 42.0 Mn 1.0; Si 2.3
    Incoloy Ma  956 - - 20.0 - - - - 4.5 - - 0.5 74.4 Y2.03 0.5
    Incoloy 600 0.05 - 15.5 - 75.0 - - - - - - 8.0 -
    Incoloy 601 0.05 - 23.0 - 60.0 - - 1.4 - - - 14.0 -
    Incoloy 604 0.04 - 15.8 - rest/bal - - - 0.10 Nb 2.0 - 7.20 Mn 0.20; Si 0.20
    Incoloy 610 0.20 - 15.5 - rest/bal - - - 0.50 Nb 1.0 - 9.0 Mn 0.90;Si 2.0
    Incoloy 617 0.07 12.5 22.5 9.0 54.0 - - 1.0 - - - - -
    Incoloy 625 0.05 - 21.5 9.0 61.0 - - 0.40 - Nb 3.65 0.40 2.5 Mn 0.50; Si 0.50
    Incoloy 671 0.05 - 48.0 - 51.0 - - - - - 0.35 - -
    Incoloy 700 0.12 28.5 15.0 3.75 46.0 - - 3.0 0.05 - 2.20 0.70 Mn 0.10; Si 0.30
    Incoloy 702 0.04 - 15.6 - rest/bal - - 3.4 0.10 - 0.70 0.35 Mn 0.05: Si 0.20
    Incoloy 705 0.30 - 15.5 - rest/bal - - - 0.50 - - 8.0 Mn 0.90 ; Si 5.5

  • Pipe Data

    CARBON STEEL PIPE DIMENSIONS


    Nominal
    pipe size    		 OD Schedule
    10     		Schedule
    20     		Schedule
    30     		Schedule
    Standard    		 Schedule
    40     		Schedule
    60     		Schedule
    XS     		Schedule
    80     		Schedule
    100     		Schedule
    120     		Schedule
    140     		Schedule
    160     		Schedule
    XXS
    mm inch mm Wall kg/m Wall kg/m Wall kg/m Wall Wt. Wall Wt. Wall Wt. Wall Wt. Wall Wt. Wall Wt. Wall Wt. Wall Wt. Wall Wt. Wall Wt.
    3 1/8 10.3             1.7 0.357 1.7 0.357     2.4 0.470 2.4 0.470                    
    6 1/4 13.7             2.2 0.625 2.2 0.625     3.0 0.804 3.0 0.804                    
    10 3/8 17.1             2.3 0.848 2.3 0.848     3.2 1.10 3.2 1.10                    
    15 1/2 21.3             2.8 1.26 2.8 1.26     3.7 1.62 3.7 1.62             4.8 1.95 7.5 2.54
    20 3/4 26.7             2.9 1.68 2.9 1.68     3.9 2.19 3.9 2.19             5.6 2.89 7.8 3.63
    25 1 33.4             3.4 2.50 3.4 2.50     4.5 3.23 4.5 3.23             6.4 4.23 9.1 5.45
    32 11/4 44.2             3.6 3.38 3.6 3.38     4.8 4.47 4.8 4.47             6.4 5.60 9.7 7.97
    40 11/2 48.3             3.7 4.05 3.7 4.05     5.1 5.40 5.1 5.40             7.1 7.23 10.2 9.58
    50 2 60.3             3.9 5.3 3.9 5.3     5.5 7.47 5.5 7.47             8.7 11.1 11.1 13.4
    65 22/2 73.0             5.2 8.62 5.2 8.62     7.0 11.4 7.0 11.4             9.5 14.9 14.0 20.4
    80 3 88.9             5.5 11.3 5.5 11.3     7.6 15.3 7.6 15.3             11.1 21.3 15.2 27.7
    90 31/2 101.6             5.7 13.6 5.7 13.6     8.1 18.6 8.1 18.6                 16.2 34.1
    100 4 114.3             6.0 16.1 6.0 16.1     8.6 22.3 8.6 22.3     11.1 28.3     13.5 33.5 17.1 41.1
    125 5 141.3             6.6 21.8 6.6 21.8     9.5 30.9 9.5 30.9     12.7 40.2     15.9 49.0 19.0 57.4
    150 6 168.3             7.1 28.2 7.1 28.2     11.0 42.5 11.0 42.5     14.3 54.2     18.3 67.5 21.9 79.1
    200 8 219.1     6.4 33.3 7.0 36.7 8.2 42.5 8.2 42.5 10.3 53.1 12.7 64.6 12.7 64.6 151.1 75.8 18.3 90.4 20.6 101 23.0 112.0 22.2 108.0
    250 10 273.0     6.4 41.7 7.8 50.9 9.3 60.2 9.3 60.2 12.7 81.5 12.7 81.5 15.1 95.8 18.3 114.7 21.4 132.9 25.4 155 28.6 172.2 25.4 155.0
    300 12 323.8     6.4 49.7 8.4 65.1 9.5 73.8 10.3 79.7 14.3 109.0 12.7 97.4 17.4 132.0 21.4 160.0 25.4 187.0 28.6 208 33.3 239.0 25.4 187.0
    350 14 355.6 6.4 54.6 7.9 68.1 9.5 81.2 9.5 81.2 11.1 94.6 15.1 126.4 12.7 107.0 19.0 158.0 23.8 195.0 27.8 224.0 31.8 253 35.7 281.0    
    400 16 406.4 6.4 62.6 7.9 77.9 9.5 93.1 9.5 93.3 12.7 123.0 16.7 160.0 12.7 123.0 21.4 203.0 26.2 245.0 30.9 286.0 36.5 333 40.5 365.0    
    450 18 457.2 6.4 70.5 7.9 87.8 11.1 122.0 9.5 105.0 14.3 156.0 19.0 206.0 12.7 139.0 23.8 254.0 29.4 310.0 34.9 363.0 39.7 408 45.2 459.0    
    500 20 508.0 6.4 78.5 9.5 117.0 12.7 155.0 9.5 117.0 15.1 183.0 20.6 248.0 12.7 155.0 26.2 311.0 32.5 381.0 38.1 441.0 44.4 508 50.0 564.0    
    550 22 558.8 6.4 86.4 9.5 129.0 12.7 171.0 9.5 129.0     22.2 294.0 12.7 171.0 28.6 373.0 34.9 451.0 41.3 526.0 47.6 600 54.0 671.0    
    600 24 609.6 6.4 94.7 9.5 141.0 14.3 210.0 9.5 141.0 17.4 255.0 24.6 355.0 12.7 187.0 30.9 441.0 38.9 547.0 45.0 639.0 52.4 719 59.5 807.0    
    650 26 660.4 7.9 128.0 12.7 203.0     9.5 153.0         12.7 203.0                        
    700 28 711.2 7.9 137.4 12.7 219.0 15.9 272.0 9.5 165.0         12.7 219.0                        
    750 30 762.0 7.9 147.0 12.7 234.6 15.9 292.6 9.5 176.0         12.7 234.6                        
    800 32 812.8 7.9 157.0 12.7 250.6 15.9 312.5 9.5 188.2         12.7 250.6                        
    850 34 863.6 7.9 167.0 12.7 266.0 15.9 332.4 9.5 200.0         12.7 266.5                        
    900 36 914.4 7.9 176.6 12.7 282.4 15.9 352.2 9.5 212.0         12.7 281.4                        

    LINE PIPE WEIGHT


    Nominal Pipe
    Size    		 Ou
    tside Diam
    eter    		 Sch
    *5    		 Sch
    *10    		 Sche
    dule
    20    		 Sche
    dule
    30    		 Stan
    da rd
    weig
    ht    		 Sched
    ule
    40    		 Extra Str
    ong    		 Sche
    dule
    60    		 Sche
    dule
    80    		 sche
    dule
    100    		 Sche
    dule
    120    		 Sche
    dule
    140    		 Sche
    dule
    160    		 Do
    uble
    Ex.
    Str.
    mm in mm Kg/m Kg/m Kg/m Kg/m Kg/m Kg/m Kg/m Kg/m Kg/m Kg/m Kg/m Kg/m Kg/m Kg/m
    8 1/4 13.7 -- 0.491 -- -- 0.63 0.63 0.80 -- 0.80 -- -- -- -- --
    10 3/8 17.1 -- 0.631 -- -- 0.84 0.84 1.10 -- 1.10 -- -- -- -- --
    15 1/2 21.3 0.801 0.999 -- -- 1.27 1.27 1.62 -- 1.62 -- -- -- 1.95 2.55
    20 3/4 26.7 1.020 1.280 -- -- 1.69 1.69 2.19 -- 2.19 -- -- -- 2.90 3.63
    25 1 33.4 1.290 2.090 -- -- 2.50 2.50 3.23 -- 3.23 -- -- -- 4.23 5.45
    32 11/4 42.2 1.650 2.69 -- -- 3.38 3.38 4.47 -- 4.47 -- -- -- 5.60 7.76
    40 11/2 48.3 1.900 3.11 -- -- 4.05 4.05 5.41 -- 5.41 -- -- -- 7.24 9.55
    50 2 60.3 3.340 3.92 -- -- 5.44 5.44 7.48 -- 7.48 -- -- -- 11.11 13.45
    65 21/2 73.0 3.690 5.26 -- -- 8.62 8.62 11.41 -- 11.41 -- -- -- 14.91 20.39
    80 3 88.9 4.510 6.45 -- -- 11.29 11.29 15.27 -- 15.27 -- -- -- 21.33 27.67
    90 31/2 101.6 5.180 7.41 -- -- 13.57 13.57 18.63 -- 18.63 -- -- -- -- --
    100 4 114.3 5.940 8.38 -- -- 16.07 16.07 22.31 -- 22.31 -- 28.30 -- 33.53 41.02
    125 5 141.3 9.340 11.60 -- -- 21.78 21.78 30.95 -- 30.95 -- 40.28 -- 49.09 57.42
    150 6 168.3 11.30 13.80 -- -- 28.26 28.26 42.56 -- 42.56 -- 54.20 -- 67.55 79.18
    200 8 219.1 14.80 20.00 33.31 36.79 42.53 42.53 64.63 53.09 64.63 75.89 90.43 100.93 111.25 107.87
    350 10 273.1 22.60 27.80 41.77 51.00 60.29 60.29 81.55 81.54 95.97 114.70 133.00 155.10 172.25 155.10
    300 12 323.9 31.24 35.99 49.72 65.20 73.82 79.72 97.44 108.96 132.01 159.85 186.92 208.04 238.72 186.92
    350 14 355.6 34.34 54.68 67.94 81.28 81.28 94.49 107.38 126.68 158.08 194.90 224.60 253.53 281.68 --
    400 16 406.4 41.56 62.63 77.86 93.21 93.21 123.29 123.29 160.12 203.48 245.50 286.62 333.11 365.39 --
    450 18 457 46.80 70.59 87.79 122.36 105.14 155.91 139.19 205.80 254.59 309.76 363.65 408.45 459.51 --
    500 20 508 59.32 78.84 177.07 155.10 117.07 183.37 155.01 247.85


    NEXT
    550 22 559 65.30 86.50 129.01 171.01 129.01 -- 171.01 --
    600 24 610 82.52 94.45 140.94 209.54 140.94 255.14 186.92 355.02
    650 26 660 -- 127.50 202.83 -- 152.87 -- 202.83 --
    700 28 711 -- 137.42 218.73 272.18 164.80 -- 218.73 --
    750 30 762 118.33 147.36 234.64 292.06 176.73 -- 236.64 --
    800 32 813 -- 152.28 250.55 311.95 188.66 342.70 250.55 --
    850 34 864 -- 167.20 266.46 331.83 200.59 364.58 266.46 --
    900 36 914 -- 177.13 282.36 351.72 212.52 420.52 282.36 --

    TUBES & PIPES


    Specification Chart of Tubes & Pipes

    CHEMICAL COMPOSITION
    CS :- Carbon Steel

    Mechanical Properties
    Tensile Strength Yield stress Elongation In
    Specification WT Type C% Mn% MAX


    P% MI

    		 S% Si% Mpa Mpa 50mm MIN Longitudinal
    ASTM A179 M/W CS 0.06-0.18 0.27-0.63 0.048 0.058 -- -- -- --
    ASTM A192 M/W CS 0.06-0.18 0.27-0.63 0.048 0.058 0.25 MAX -- -- --
    ASTM A210/ A1 M/W CS 0.27 MAX 0.93 MAX 0.048 0.058 0.10 MAX 312 MAX 255 MIN 30
    DIN/17175/ST35.8 A/W CS 0.17 MAX 0.40 MIN 0.040 0.040 0.35 MAX 340-441 235 MIN 25
    DIN/17175/ST45.8 A/W CS 0.22 MAX 0.45 MIN 0.040 0.040 0.10-0.35 441-540 255 MIN 21
    IS 3074 CDS1 A/W CS 0.20 MAX 0.30-0.60 0.050 0.050 -- 432 373 --
    IS 3074 CDS2 A/W CS 0.10-0.18 0.40-0.80 0.050 0.050 -- 432 373 --
    IS 3074 CDS3 A/W CS 0.10-0.18 0.40-0.80 0.050 0.050 -- 432 373 --
    IS 3074 CDS4 A/W CS 0.10-0.18 0.60-0.90 0.050 0.050 -- 569 461 --
    IS 3074 CDS5 A/W CS 0.10-0.18 0.60-0.90 0.050 0.050 >-- 687 589 --
    DIN 2391 PART1 5T-35 -- CS 0.17 >0.04 0.050 0.050 0.35 432 - 5%
    DIN 2391 PART1 5T-45 -- CS 0.21 >0.04 0.050 0.050 0.35 540 -- 5%
    BS 6323 PART 4 -- CS 0.25 MAX 1.25 MAX 0.050 0.050 0.35 520 415 5%

Exports for Metal & Metal Products

Metal Ministry inc. exports Metal & Metal Products in various countries like India, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia.
Metal Ministry inc. exports Metal & Metal Products in various cities like Mumbai, Thane, Navi Mumbai, Pune, Pimpri-Chinchwad, Vadodara, Kolkata, Gurgaon, Ahmedabad, New Delhi, Bengaluru, Chennai, Surat, Bhopal, Ulsan, Faridabad, Houston, Dubai, Seoul, Hyderabad, Singapore, Abu Dhabi, Tehran, Calgary, Noida, Riyadh, London, Coimbatore, Jakarta, Istanbul, Bangkok, Kuwait City, Sharjah, Muscat, Edmonton, Busan, Mexico City, Doha, Jeddah, Aberdeen, Cairo, Geoje-si, Perth, Santiago, Chandigarh, Indore, Kuala Lumpur, Rio de Janeiro, Dammam, Melbourne, Madrid, La Victoria, Bogota, Lahore, Los Angeles, Algiers, Chiyoda, Ankara, Ho Chi Minh City, Toronto, Hong Kong, Rajkot, Brisbane, Petaling Jaya, Ernakulam, Secunderabad, Gimhae-si, Al Jubail, Port-of-Spain, Thiruvananthapuram, Milan, Atyrau, Lagos, Hanoi, Howrah, Sydney, Ahvaz, Karachi, New York, Caracas, Vung Tau, Al Khobar, Manama, Montreal, Granada, Courbevoie, Visakhapatnam, Ludhiana, Moscow, Dallas, Haryana, Colombo.
If you have any enquiries related to any of our Metal & Metal Products feel free to get back to us on :- Phone : +919892171042,
Email : enquiry@metalministry.in

Stay Updated With Our Newsletter